Wireless interface between the popular iNavX Marine Navigation App for iPad and the NMEA 2000 network is now possible with the enhanced Chetco Digital Instrument's SeaSmart.net WiFi adapter.
Brookings, OR (PRWEB) January 31, 2012
An additional benefit of the enhanced SeaSmart.net is support for legacy AIS information. A second port on the adapter offers direct connection to NMEA 0813 devices and multiplexes the incoming data over the wireless TCP/UDP port thus allowing iNavX to also display AIS vessel target information on top of nautical charts. This provides vessel operators a path to keep existing equipment while still migrating to the advanced NMEA 2000 network. Because SeaSmart.net supports a full suite of networking protocols, all vessel information including local AIS targets can be relayed up to the internet for remote access/viewing. iNavX running on an iPad/iPhone can view vessel information from thousands of miles away.
SeaSmart.net works by converting the raw NMEA 2000 and NMEA 0183 data streams into a routable TCP/UDP protocol that can be easily transported over internet equipment. The published “Open Protocol” allows developers to work on a common platform to add support for native NMEA 2000 information not available with legacy equipment. “We have even created a LIVE vessel data feed available over the internet to assist developers,” says Joe Burke, CTO at Chetco Digital. The adapters support multiple simultaneous clients and provide a full featured Web Server for configuration and monitoring. Updates can be performed remotely using the embedded FTP server.
The compact bus-powered SeaSmart.net adapters are available in both standalone Wireless (802.11 b/g) and wired Ethernet for infrastructure networks. With a footprint of only 4" X 2" X 2" and a power draw of less than 500mA, the water-resistant SeaSmart.net WiFi adapter is perfect for Luxury Yachts, Sail boats or other craft that demand compact low-impact equipment. A SeaSmart.net device and an iPad running iNavX is all that is needed to access and monitor vessel data.
SeaSmart.net products are available directly on-line at http://www.seasmart.net, http://www.digitalmarinegauges.com or http://www.gemeco.com and in Europe http://www.ipadnav.fr Pricing starts at $495 for Ethernet and $625 for the basic WiFi unit. An optional data logging adapter is $75. Volume and kit pricing is available.
The SeaSmart.net products can be viewed in the AirMar Booth N49 at the Miami International Boat Show February 12 to 16, 2012.
For more information on SeaSmart.Net™ or to purchase directly from Chetco Digital visit http://www.seasmart.net. For more information on where to buy SeaGauge™ or other Chetco Digital products see our web site at http://www.digitalmarinegauges.com, email sales(at)chetcodigital(dot)com or call 541 469 4783. For information about iNavX visit http://www.inavx.com. SeaSmart can also be purchased at Gemeco Marine Accessories (dealers only), and in France at http://www.ipadnav.fr.
Contact
Joe Burke
Phone: 1 541 469 4783
E-Mail: sales(at)chetcodigital(dot)com
Web: http://www.seasmart.net/marine-wireless-networking-press.html
Box 5359 Brookings, OR 97415
# # #
Joe Burke
Chetco Digital Instruments
(541) 469-4783
Email Information



There are no comments yet