Campbell Vaughn: Don't cut corners when mowing your lawn
With the warm weather and all the spring rains we had, our turf is on the move upward.
While many of us consider mowing the lawn to be an unwelcome aspect of home ownership, good mowing techniques contribute to a nice lawn. Your lawn is one of the most highly visible portions of your landscape and mowing it correctly has a tremendous impact on its health and vigor.
Many times, I have seen folks scalping their lawns by cutting them way too short. Typically, the homeowner tells me, “I figure the lower I cut the grass the less often I have to cut it.” The concept is good, but the methodology is poor.
You might be able to get away with occasional low mowing on hybrid bermuda lawns which can be maintained at 0.5 to 1.5 inches in height, but low mowing or scalping stresses the lawn. Scalping will dull the heck out of a mower blade as well.
With a little TLC, bermuda can overcome injury from low mowing with adequate water and fertilizer but it is not ideal. Zoysia can withstand relatively low mowing with mowing heights in the 1 to 2-inch range, but don’t try that trick with St. Augustine or centipede. St. Augustine likes to be cut at a height of 2.5-3.5 inches while centipede can be maintained near 2 inches.
It is important to remember that during periods of a head and drought stress like we have had in the past couple weeks, you should raise your cutting height slightly. I’d like to see most bermuda and zoysia lawns cut at a height of 1.5 inches during really dry weather. St. Augustine should be cut at a height of about 3.5 inches during dry weather.
All of us have at one time or another gone on vacation and fallen behind on chores and let our grass get too tall. You know the feeling. It seems like you’re cutting hay instead of mowing a lawn. Well, a severe reduction in grass height also stresses the lawn. Try to cut often enough that you only remove one-third of the total length of the grass blade each time you cut, and you won’t have to bale the clippings. If the lawn gets too tall then gradually reduce its height over a period of several mowings.
Campbell Vaughn: Learn why the founding fathers made bald eagles our national emblem
Campbell Vaughn: Fungal issues on plants will be a problem in this current weather
A dull blade can create problems as well. Dull mower blades leave a ragged edge on the freshly cut leaf of grass. These ragged edges turn brown, giving an ugly appearance to the lawn. This increased surface area can provide an entry point for harmful organisms. Ragged cutting also increases water loss from the lawn.
Remember that grass mowing isn’t a race. Give the blade a chance to ride over the grass and cut it. Quick turns on riding mowers will tear the grass out by the roots especially when wet. Rotate the direction you cut the grass as well. It will make the grass stand more upright.
A final question many folks have is whether to use a mulching mower or bag their lawn clippings. When cut regularly, grass clippings do not form a thick thatch layer. Mulching the grass clippings allows the nutrients they contain to be recycled in the lawn which mean less fertilizer is needed. Bagging your clippings may give a tighter appearance to the lawn but it takes longer to mow.
According to a Texas study, at the end of six months mulching mower owners spent seven hours less time mowing than the “baggers” in their test. If you do bag, also remember to add one to two extra doses of nitrogen on bermuda and zoysia during the active growing season.
Regardless of whether you bag or mulch, don’t cut corners when you mow your lawn. Cutting at the right height and with sharp blade equals a better lawn.
This article originally appeared on Augusta Chronicle: Campbell Vaughn offers tips to protect your grass when mowing lawns
