DDH ID

X_NAD83_Z18N

Y_NAD83_Z18N

Elevation

Azimuth (planned)

Azimuth (measured)

Dip planned

Dip (measured)

Planned Depth

Total Drilled length

EM21-143

698713

5798618

485.0

215

215.35

-56.9

56.92

550

567

EM21-144

698568

5799058

485

215

215.1

-75

75

450

477

EM21-145

698315

5799210

487

215

215.3

-60

60

350

333

EM21-146

698280

5799265

495

215

215

-60

60

350

297

EM21-147

698184

5799041

490

220

220

-55

55

200

225

EM21-148

698192

5799167

491

220

220

-60

55

265

265

EM21-149

698014

5799532

487

217

217

-55

54.9

220

225

EM21-150

698182

5799743

510

217

217.1

-55

54.9

165

201

EM21-151

698569

5798713

483

216

216.19

-60

60.4

620

657

EM21-152

699236

5798936

508

225

225

-75

74.9

600

636

EM21-153

699248

5798810

480

225

225.3

-80

80.5

620

619.3

EM21-154

699247

5799006

484

225

225.16

-75

75

610

675

EM21-155

698518

5798790

486

220

219.88

-60

60.4

575

585

EM21-156

698582

5799177

485

215

215.04

-75

75.3

450

507

EM21-157

698434

5799154

485

240

239.9

-60

58

450

471

EM21-158

698405

5799250

483

245

249

-60

59

600

648

EM21-159

698520

5799290

484

245

244.5

-65

-64.9

450

450

EM21-160

700655

5797357

503

215

214.66

-70

-70.4

450

477

EM21-161

701002

5797424

499

215

214.9

-60

-60.2

300

351

EM21-162

700174

5798070

488

210

210.4

-65

-65.3

550

651

EM21-163

701190

5797310

509

215

215.3

-60

-60

300

201

EM21-164

701030

5797282

524

210

210.4

-60

-60.2

200

273

EM21-165

700394

5798111

487

210

-74

-73.9

800

783

EM21-166

701160

5797442

494

215

214.9

-60

-60.6

380

411

EM21-167

701401

5797480

503

180

180.1

-70

-70.2

360

468

EM21-168

700280

5798134

485

210

210.3

-75

-75

680

687

EM21-169

701246

5797779

490

210

209.6

-75

-74.6

450

621

EM21-170

700276

5797965

490

210

210.3

-70

-70.4

600

636

EM21-171

700171

5797963

489

210

210

-70

-70.3

525

567

EM21-172

700605

5797443

495

210

209.9

-60

-60

450

453

EM21-173

700297

5797805

492

210

204.3

-70

-71

460

463

EM21-174

701371

5798073

484

210

209.65

-65

-65.3

800

781.45

EM21-175

700226

5797876

487

206

207.71

-70

-70

550

573

EM21-176

701210

5798045

483

213

212.8

-67

-67

610

624

EM21-177

700114

5797875

486

210

209.9

-70

-70.1

465

471

EM21-178

700263

5798666

481

215

215.3

-65

-65

600

603

EM21-179

700062

5797789

485

210

209.9

-70

-70.1

400

444

EM21-180

700357

5798529

482

210

210.1

-70

-70.5

650

648

EM21-181

700181

5797790

487

210

209.9

-65

-65.2

490

486

EM21-182

700341

5798224

484

210

209.9

-75

-75.2

700

780

EM21-183

700080

5798025

485

210

209.8

68

-67

600

669

EM21-184

700368

5797902

491

210

210.2

-70

-70.1

600

573

EM21-185

700305

5798405

486

210

209.47

-70

-70.02

800

804

EM21-186

700262

5797716

494

210

209.5

-70

-70.1

420

474

EM21-187

700428

5798232

487

210

205.65

-75

-75.2

780

831

EM21-188

700188

5797587

492

210

-70

-70.1

380

342

EM21-189

700039

5797566

495

210

209.45

-70

-69.94

350

309

EM21-190

700675

5797450

497

210

210.7

-65

-65.88

450

474

EM21-191

700474

5798085

492

210

208.3

-70

-69.83

680

696

EM21-192

701121

5797475

504

215

215

-60

-59.9

380

429

EM21-193

701204

5797420

494

215

215.2

-60

-59.9

430

420

EM21-194

700230

5798513

490

210

209.7

-70

-70.1

800

837

EM21-195

701352

5797496

500

185

184.8

-70

-70.1

460

513

EM21-196

701352

5797496

500

215

215.4

-60

-59.7

750

750

EM21-197

700253

5798660

479

200

196.7

-82

-83

550

798

EM21-198

701457

5797479

505

185

185.4

-70

-70.4

550

591

EM21-199

699463

5798380

480

215

214.7

-70

-69.9

650

720

EM21-200

701470

5797599

513

185

184.83

-70

-69.9

550

654

EM21-201

699599

5798581

484

210

209.6

-70

-70

750

816

EM21-202

701389

5797381

502

185

184.9

-70

-70

450

528

EM21-203

699776

5798523

483

215

215.1

-70

-70.1

670

627

EM21-204-B

699141

5799038

487

215

215.4

-70

-70.1

600

711

EM21-205

699783

5798534

482

215

214.9

-80

-79.9

700

693

EM21-206

701545

5797486

513

185

185.1

-70

-69.9

550

600

EM21-207

701411

5797582

505

185

N/A

-70

N/A

480

591

EM21-208

699050

5799080

493

215

215.89

-70

-70.28

650

588

EM21-209

699735

5798655

482

215

215.7

-75

-75.02

650

741

EM21-210

701222

5797541

503

215

214.33

-65

-65.51

500

510

EM21-211

699095

5798740

485

220

220.91

-70

-69.92

500

471

EM21-212

699647

5798671

477

215

N/A

-70

N/A

700

In progress

EM21-213

700971

5797181

531

215

215.05

-60

-60.1

300

In progress

EM21-214

699169

5798821

481

220

219.8

-70

-69.8

550

In progress

Criteria

JORC Code explanation

Commentary

Sampling techniques

• Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.

• Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.

• Aspects of the determination of mineralisation that are Material to the Public Report.

• In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.

• NQ size core drilling

• This release does not include analytical results

• Qualitative observations only

Drilling techniques

• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).

• Triple tube NQ core drilling.

• Hole depths vary between 201m and 675m

• Core was oriented using downhole orientation tool

Drill sample recovery

• Method of recording and assessing core and chip sample recoveries and results assessed.

• Measures taken to maximise sample recovery and ensure representative nature of the samples.

• Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.

• Core recoveries are routinely measured by comparing the length of core recovered against the length of drill rods used and recorded by the drilling contractor.

• For sampled intervals the core is cut in half and half of the core is sent for assays whilst the other half of the core is retained in the core tray for future reference

• Length of core sampled for individual assays is determined by the logging geologist following geological/mineralisation boundaries

• To ensure representativity, no intervals shorter than 50cm are sampled.

Logging

• Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.

• Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.

• The total length and percentage of the relevant intersections logged.

• All core is logged for

• Lithology

• Alteration

• Mineralisation

• Mineral species abundance

• Veining

• Structures

• Both qualitative and quantitative logging is routinely conducted

• 100% of the core drilled is logged

Sub-sampling techniques and sample preparation

• If core, whether cut or sawn and whether quarter, half or all core taken.

• If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.

• For all sample types, the nature, quality and appropriateness of the sample preparation technique.

• Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.

• Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling.

• Whether sample sizes are appropriate to the grain size of the material being sampled.

• Half core sampled

Quality of assay data and laboratory tests

• The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.

• For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.

• Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.

• Most samples are submitted for Gold assay by Fire assay and AA (Atomic Absorption) of a 50g pulverized sample with gravimetic determination if >10 g/t.

• Samples where visual observations suggested potential high grade gold and samples with visible gold are routinely submitted for metallic screen fire assays.

• At this stage, no studies have been finalized on the repartition and size of the gold grains in the system, however visual observations of gold grains larger than 0.5mm suggest that fire assays should be considered a partial method at this stage

• Coarse rejects samples will be analysed as duplicates using PhotonAssay

Verification of sampling and assaying

• The verification of significant intersections by either independent or alternative company personnel.

• The use of twinned holes.

• Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.

• Discuss any adjustment to assay data.

• No twinning of holes at this stage

• All sampling protocols have been peer reviewed and all data is stored appropriately

• No adjustments to assay data have taken place.

Location of data points

• Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.

• Specification of the grid system used.

• Quality and adequacy of topographic control.

• All drillhole locations have been surveyed by handheld GPS with a typical accuracy of +/-4m

• Downhole surveys are conducted using a Reflex Multishot Gyro or an Axis North Seeking Gyro.

• Grid: UTM NAD83 Zone 18N

• Topographic control is cross-checked with a 2013 LIDAR survey

Data spacing and distribution

• Data spacing for reporting of Exploration Results.

• Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.

• Whether sample compositing has been applied.

• All drilling conducted by Benz Mining in 2020 and 2021 is wide spaced and exploratory in nature.

• Spacing between drillholes is typically 100m which is insufficient for resource estimation

Orientation of data in relation to geological structure

• Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.

• If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.

• Drilling targeted newly identified areas in the geological system. All drilling is oriented towards the SW. As some mineralisation at the project is seemingly dipping toward the NE the orientation of sampling should not introduce a bias in the samples.

Sample security

• The measures taken to ensure sample security.

• All samples are routinely cut and prepared on site by company employees and contractors.

• Samples bags are sealed and transported to the laboratory directly from the sampling site by specialized transport companies.

Audits or reviews

• The results of any audits or reviews of sampling techniques and data.

• The Company is constantly reviewing its sampling and assaying policies. No external audit has been conducted at this stage.

Criteria

JORC Code explanation

Commentary

Mineral tenement and land tenure status

• Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.

• The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.

• The Eastmain Mine Project comprises 152 contiguous mining claims each with an area of approximately 52.7 ha covering a total of 8,014.36 ha plus one industrial lease permit that are owned by Eastmain Mines Inc., a wholly owned subsidiary of Fury Gold Mines. The claims are numbered 1133433 to 1133583 consecutively plus claim 104458 (Figure 4.2). All of the claims are located within NTS sheet 33A 08.

• The former Mine Lease BM 817 was issued on January 10, 1995 and expired in 2015 after a 20-year term. This former Mine Lease was converted to Industrial Lease 00184710000 on September 1, 2015 and contains all normal surface rights. The former mineral rights for BM 817 are now included in the expanded Claims 1133523, 1133524, 1133525, 1133505, 1133506 and 1133507.

• The claims are 100% held by Fury Gold Mines subject to certain net smelter royalties ("NSR").

• On August 9, 2019, Benz Mining Corp. announced that it has entered into an option agreement with Eastmain Resources Inc. (now Fury Gold Mines) to acquire a 100% interest in the former producing Eastmain Gold Project located in James Bay District, Quebec, for CAD $5,000,000.

• Eastmain Resources would retain a 2% Net Smelter Return royalty in respect of the Project. Benz may, at any time, purchase one half of the NSR Royalty, thereby reducing the NSR Royalty to a 1% net smelter returns royalty, for $1,500,000.

• The Eastmain Mine, as defined by the perimeter of a historic mining lease, is subject to a production royalty net smelter return ("NSR") of 2.3% through production of the next 250,000 oz produced and 2% thereafter. A package of claims surrounding the mine precinct is subject to a production royalty (NSR) of 2% in favor of Goldcorp as a result of their succession to Placer Dome in an agreement dated December 30, 1988 between Placer Dome, MSV Resources Inc. and Northgate Exploration Limited.

• The 152 claims that form the Eastmain Mine Property are all in good standing with an active status.

Exploration done by other parties

• Acknowledgment and appraisal of exploration by other parties.

• 1930s & 1940s - Prospecting of gossans

• 1950s & 1960s - Riocanex - Exploration of the Upper Eastmain Greenstone Belt

• Mid 1960s - Fort George - Diamond drilling of a gossan zone

• 1696 - Canex Aerial Exploration Ltd & Placer Development Ltd - Airborne magnetic and EM surveys with ground geophysics follow up.

• 1970 - Placer Development Ltd - Seven holes testing an EM anomaly. Discovery of A Zone with 1.5m @ 13.71g/t Au

• 1974 - Nordore - Aerodat airborne AEM survey and Ground geophysics. 3 holes returned anomalous gold values adjacent to B Zone

• 1974 - Inco Uranerz - Airborne geophysical survey over the whole greenstone belt.

• 1981 & 1982 - Placer - Airborne and ground EM, ground magnetics. Drilling of EM anomalies discovered B zone and C zone.

• 1983 to 1985 - Placer - Airborne and ground EM, downhole PEM, 91 holes over A B and C zones.

• 1986 - Placer - 25 holes into A B and C zones

• 1987 &1988 - Placer Dome / MSV JV - Drilling of A, B and C zones

• 1988 to 1994 - MSV Resources - Drilling, surface sampling, trenching, regional exploration, Seismic refraction over ABC Zones,

• 1994 & 1995 - MSV Resources - Mining of 118,356t at 10.58g/t Au and 0.3%Cu, processed at Copper Rand plant in Chibougamau, 40,000oz recovered

• 1997 - MSV Resources- Exploration, mapping, prospecting, trenching.

• 2004 - Campbell Resources - M&I resource calculation for Eastmain Mine.

• 2005-2007 - Eastmain Resources - Purchase of the project from Campbell Resources, VTEM, Prospecting, regional exploration.

• 2007-2019 - Eastmain Resources - Sporadic drilling, regional exploration, mapping, sampling, trenching. Surface geochemistry (soils)

Geology

• Deposit type, geological setting and style of mineralisation.

• In the Eastmain Gold Deposit, gold mineralization occurs in quartz veins with associated massive to semi-massive sulphide lenses/ veins and silicified zones associated with a deformation corridor.

• The mineralized zones are 3 m to 10 m thick and contained in a strongly deformed and altered assemblage (Mine series) consisting of felsic, mafic and ultramafic rocks.

• Mineralized quartz veins and lenses show a variable thickness between 10 cm and 13 m, and sulphide contents average 15% to 20% in the mineralized quartz veins and sulphide lenses. In order of decreasing abundance, sulphides consist of pyrrhotite, pyrite, and chalcopyrite, with minor sphalerite, magnetite and molybdenite. Visible gold occurs in the mineralized quartz veins as small (<1 mm) grains associated with quartz and (or) sulphides in the A, B and C Zones.

• At E Zone, mineralization is also associated with a Tonalite intrusion. Mineralisation occurs at the upper sheared contact between the Tonalite and the overlying ultramafic units. Mineralisation also occurs in veins within the tonalite and in zones displaying silica-sericite-albite alteration.

Drill hole Information

• A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes:

  • easting and northing of the drill hole collar

  • elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar

  • dip and azimuth of the hole

  • down hole length and interception depth

  • hole length.

• If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.

• See tables in Appendix 1

Data aggregation methods

• In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated.

• Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.

• The assumptions used for any reporting of metal equivalent values should be clearly stated.

• No analytical results reported

• Qualitative observations only

Relationship between mineralisation widths and intercept lengths

• These relationships are particularly important in the reporting of Exploration Results.

• If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.

• If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').

• The exact geometry of the system is still not completely known.

• Drillhole orientation and known structural setting suggest that drillholes intersected mineralisation close to perpendicularly meaning that downhole intervals are believed to be close to true width/thickness

Diagrams

• Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.

• See figures in the body of text

Balanced reporting

• Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.

• No analytical results released in this announcement.

Other substantive exploration data

• Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.

• Benz conducts systematic BHEM of each hole drilled as well as BHEM surveying of historical holes.

• BHEM identified over 150 in-hole and off-hole conductors coincident or not with drilled mineralization.

Further work

• The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling).

• Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.

• Benz Mining is currently conducting a 50,000m drilling campaign which started in January 2021, approximatively 35,000m has been executed with c.15,000m remaining

• This drilling is conducted alongside regional FLEM surveys (TMC Geophysics)

• All new holes will be surveyed by BHEM as well as a selection of historical holes.